ABPC (Power Connectors)

Power Connectors (Aerospace and Defence, Traction, Industrial)

3 start coarse thread/Anti Vibration Device/Plastic Body Power Distribution Connector, Conforms to CECC 75-201-007, Polychloroprene Inserts, -55c to +100C (also to +125C), 7.5 to 100amps, 1 to 37 contacts.

Plastic Body Power Distribution Connector.

ABPC Series. The AB Power Connector range of heavy duty electrical connectors is designed for general purpose use and to meet the requirements of power distribution in harsh environments (can also accommodate low halogen inserts where suitable in the ABCIRH range).

The outer shell components are manufactured from a tough thermo-plastic to ensure full insulation and high corrosion resistance. Inner shell components are plated aluminium for strength and provide electrical continuity for screening purposes.

The connectors feature bonded leading earth contacts and pilot pins for "earth loop monitoring".

The AB Power Connectors have contact arrangements suitable for both single or three phase power supplies.

The connectors conform to specification CECC 75-201-007.

Please contact factory for detail of additional versions with signal contacts.



Outer Body: Thermoplastic (Black).

Inner Shells: Aluminium alloy. Cadmium free plated with olive drab passivation. (Alternative finishes available).

Insulator: Polychloroprene.

Grommet: Polychloroprene.

Contacts: Copper alloy, silver plated. Pilot contact, gold plated.


Coupling: 3 start coarse thread with anti-vibration device.

Polarisation: Key/Keyway.

Contact type: Solder.

Contact Arrangements: 3 shell sizes, 3 to 6 contacts


Maximum contact Current Rating: Up to 100 amps.

Voltage Rating: 750V AC or DC peak.

Contact Resistance: 5 Milliohms max.

Temperature Rating: -55°C to +100°C